Caulking around the edges is another option. Learn more about it here. For more ideas on trims, click here.
If you can’t find trim tiles in the right thickness, try to special order them, or use an alternative, such as rail liners.
The edge you will be trimming is 96 inches long. Your desired trim tiles are 4 inches long. 96 divided by 4 = 24 tiles. If the number is not a whole number (i. e. 24. 5), round up.
If you are working on a counter, start on the side that touches the wall instead.
Use the same method to install your trim tiles as you did your other tiles. You should use the same type of grout that you used on the rest of your project so that everything matches.
Examples of natural stone include granite, marble, and travertine. A bullnose is where the sharp edge has been ground into a smooth, curved edge.
A mitered edge is where the sharp edge has been ground at a 45-degree slant.
Caulk is great for bathrooms, where a water-tight seal is important. This method is not recommended for tiles with raw, coarse, or unfinished edges.
Caulk is great for bathrooms, where a water-tight seal is important. This method is not recommended for tiles with raw, coarse, or unfinished edges.
If you are going to be using these near a sink, get the kind with a raised edge. This will keep the water from dripping onto the floor. Match the material to the rest of the tiles on the counter. You can use a matching color, or a different color.
These may also be called “pencil liners. “[11] X Research source
Match the rail molding to the surrounding ones, or use a contrasting one for a more unique finish. Some places sell rail moldings as “cap moldings” or “chair rails. “[13] X Research source
Metal edges come in different shapes. Use L-shaped ones for a square finish, or rounded/bullnose ones for a curved finish. Metal edges come in different textures, such as smooth, speckled, and brushed.
