Fold the top half of a square napkin down to completely cover the bottom half. This makes a rectangle.
Fold the left half of the napkin over to cover the right half. Now you have a square again.
Fold the right half of the napkin over to cover the left half. This little rectangle is your finished product! 4) Set the napkin on the plate (or to the left of the plate) with the fold facing to the right. If you want to set the napkin on the right side of the plate, turn the napkin so the fold is facing the plate.
Fold the top of a square napkin in half, working from the top side down, to form a long rectangle.
Pleat the napkin like an accordion, working from left to right. Fold over about 1 in (2. 5 cm) of the napkin from the left edge, then fold the next 1 in (2. 5 cm) under the napkin, and so on all the way across.
Slide one end of the napkin into a wine glass and fan it out at the top. Keep the napkin scrunched together and slide it into the top of the glass. Make minor adjustments by hand to make it look like the napkin is flowering out the top of the goblet.
Fold the top left corner of a square napkin down to the bottom right corner, creating a right triangle.
Rotate the triangle so that the longest side is at the bottom. Lay the silverware on the center bottom of the napkin, running parallel to the longest side of the triangle.
Fold in the left and then right corners of the triangle so that they cover the silverware.
Starting at the bottom, tightly roll up the napkin all the way to the pointed top, neatly securing the silverware inside.
Fold the top of a square napkin in half, working from the top side down, to form a long rectangle.
Fold the right half over top of the left half to create a smaller square.
Flip the napkin over so the “open” corner (where you can separate the layers of fabric) is at the top left.
Fold the top layer of fabric down from the left corner to the right corner.
Flip the napkin over again so the open corner is at the top right.
Fold 1/3 of the fabric on the right edge over to the middle of the napkin.
Bring the left 1/3 over the center so the folded sides overlap. You’ll now have a thin, vertically-oriented rectangle.
Flip the napkin over and insert your silverware into the pouch. The opening of the pouch will be a diagonal slit in the middle of the rectangle.
Fold in the four corners of a square napkin to the center of the square, creating a diamond shape.
Fold the four corners of the diamond into the center, creating a smaller square.
Flip the napkin over and fold the four corners in once again. You’ll end up with—you guessed it—a smaller diamond shape.
Pull out the bottom fold of each corner of the diamond. Reach under one of the corners and pull the fabric outward. Once you do this to all four sides, your napkin will look like a four-sided, star-shaped flower.
Fold the top half of a square napkin down to the bottom to create a rectangle.
Fold the left half of the rectangle over top of the right half. You’ll now have a smaller square with open layers of material on the bottom and right sides.
Fold the top layer of material from the bottom right corner up to the top left corner.
Fold the second layer of material from the bottom right corner up to about 1 in (2. 5 cm) below the top left corner. Unlike with the previous fold, don’t go quite all the way up to the top left corner.
Repeat the same fold two more times with the remaining two layers, each time stopping about 1 in (2. 5 cm) short of the last layer. This creates four visible layers of folds.
Rotate the napkin 45 degrees (1/8 of a turn) clockwise so it looks like a series of mountain peaks.
Fold the left and right sides under the napkin, creating a point at the bottom.
Fold over the top and bottom parts of a square napkin so that they meet in the middle. You’ll end up with a rectangle with a horizontal line running across its middle.
Fold in the left and right sides so they meet in the middle, creating a smaller square.
Flip the napkin over.
Use your thumb and first two fingers to pinch together the napkin from the top and bottom. You’ll see the bow tie (or butterfly) shape now! 5) Secure the middle with a napkin ring or a strip of fabric. Slip the napkin ring over one side of the napkin and into the middle. Or, wrap a strip of fabric around the pinched-together area and tack it in place with a small dab of hot glue.
Fold the top left corner of a square napkin down to the bottom right corner. Rotate the triangle you just made so that the longest side is at the bottom.
Fold up the bottom 1 in (2. 5 cm) of the long side of the triangle. Run your finger over the fold to smooth it down flat.
Roll up the napkin into a tight cylinder, starting from the left corner of the triangle. Tuck the last little bit of fabric at the right corner of the triangle into the rolled-up material.
Stand the napkin upright. If you rolled it tightly and evenly, it’ll stand up straight instead of looking like the Leaning Tower of Pisa!
Fold a square napkin in half from the top side down. You’ll end up with a rectangle with the long sides at the top and bottom.
Fold the top right corner down to the center point of the bottom edge of the rectangle. You’ll now have a shape like a square scrunched up against a right triangle.
Fold the top left corner down in the same fashion. Now you have two scrunched together right triangles forming one bigger triangle! 4) Flip the napkin over and fold it in half along its vertical center line. Make this a “loose” fold instead of pressing it down smooth.
Stand the napkin up on a plate so that it forms an upright 90-degree (right) triangle. The open sides of the triangle will rest on the plate and rise up perpendicular to the plate.
Grab the top left corner of a square napkin and fold it down to the bottom right corner. You’ll have a triangle with a 90-degree angle at the bottom right.
Rotate the napkin so the longest side of the triangle (opposite the right angle) is at the top, running horizontally.
Fold the right-side corner of the triangle down to meet the bottom corner.
Bring the left corner down the same way to make a diamond shape. There will be a vertical slit in the middle of the diamond.
Flip the napkin over and fold the top corner down to meet the bottom corner. You’ll now have a triangle once again! 6) Fold the right-side corner over to meet the left side corner. Now you’ll have a small right triangle with the 90-degree angle at the top right.
Stand the napkin up like a tent and place it on a plate. Set the longest side of the triangle down on the plate and gently fluff out the sides of the triangle to create a slight pyramid shape.
Lay a square napkin in a diamond orientation (corners at top, bottom, left, and right) and fold in the top and bottom corners to the center point of the napkin. The tips of the folded-in corners should touch, not overlap.
Fold in the top and bottom edges to the horizontal midline of the napkin, right over top of the folded-in corners.
Fold the top and bottom edges to the napkin’s horizontal midline once again.
Fold the napkin in half, top over bottom, along the horizontal midline.
Put your left thumb along the bottom of the napkin, about 3 in (7. 6 cm) from the right edge, and fold over the fabric to the right of your thumb upward at a 90-degree angle. Keep your thumb in position.
Put your right thumb next to your left one, pick up the napkin, and roll it in a tight spiral from right to left. You’ll end up with a tight cylinder with two short “tongues” sticking out from the bottom.
Flip the rolled-up napkin over and tuck one of the two loose ends (“tongues”) into the folds of the fabric. Flip the napkin back over when you’ve done this.
Fluff out the other loose end and the inner folds a little to make your rose “bloom” slightly. Center the napkin on a plate and you’re ready to go!
Make a rectangle by folding your square napkin in half from top to bottom.
Fold the top right corner down to touch the center of the bottom edge.
Fold the bottom left corner up to touch what was the center of the top edge. The napkin will look like a parallelogram.
Flip the napkin over so that the long sides of the parallelogram remain at the top and bottom, and the shorter sides remain at the left and right.
Fold the bottom edge up to meet the top edge. However, leave the bottom layer of fabric in place along the bottom edge—it will point downward in the shape of a small triangle.
Reach under the right side of the napkin along the bottom edge and unfold the triangular flap. The napkin will now look like two overlapping, downward-pointing triangles.
Fold the left-side triangle in half. Lift up the top layer of the right-side triangle, fold the left corner of the left-side triangle under it, then lay the top layer of the right-side triangle back in place.
Flip the napkin over and tuck the right edge into the left flap. Once you flip the napkin over, you’ll see a diagonal slit on the left side—grab the far right edge of the napkin and slip it into this flap. The napkin will look like a flattened crown with two points on top.
Lift up the “hat,” spread open the bottom, and set it on a plate. Pick up the hat so the points are facing upward, then press inward to give the flattened hat a rounded shape. Now it’s ready for the plate!
