Look for a sturdy pair with sharp blades that won’t dull quickly. The Oyster brand is known for making high quality tools, although they tend to be on the pricy side.
Mid-buzzcut is definitely not the ideal time to reference the manual, so get to know your tool.
If you have a lot of variation all over your head or if you’re afraid you might forget the growth directions, take down a few notes for reference.
If you’ve never had a buzz cut before, you probably won’t know if you have any bald spots, lumps, scars or any other scalp issues that you wouldn’t want to be visible. [2] X Research source Always start a cut with clean and groomed hair, which will extend the life of your blades.
If you have persistent long pieces, cut them carefully with scissors.
Go slowly and pay close attention to what you’re doing around the ears.
Repeat the process of making one pass with the clippers and then checking the mirror until you’ve buzzed all of the back of your head. If you don’t have a second mirror on hand, use the camera on your phone.
Try going side to side across the top of the head, and both forward and backwards. Feel for any leftover long pieces with your fingers and clean up whatever remains.
Use two mirrors or a camera to check your work and clean it up if needed. Be careful not to cut an uneven line at the bottom of the style.
Check your manual for any specific care your particular blades may need. After having your clippers for a while, you may begin to notice that it is cutting unevenly and pulling at your hair. This means you either need to sharpen or replace your blades, whichever you prefer.
For cuts that are longer than an inch, wet your hair first and then use a blow dryer to make the hair spike up. For additional hold or texture, apply a small amount of hair wax or cream after blow drying.
Whenever you feel this happening to yours, immediately turn them off and let them cool down a bit before resuming. This will keep your clippers functioning well over time.
