Compare your measurement to a ring size chart to find your ring size number. Add a couple of millimeters to your measurement if you’re using a thick spoon or want a little more wiggle room.
Consider making your first ring out of an inexpensive spoon. This way, you can do a trial run before making a ring out of a priceless antique or heirloom.
The tool you use is entirely up to preference. Use 1 tool or try a hand at all 3.
Ring mandrels are tapered rods that have ring sizes built-in. If you don’t have a mandrel, try shaping your ring with a socket or metal rod. [5] X Research source Use a vise to help hold the mandrel or socket in place. [6] X Research source
Make your ring a bit bigger at first, try it on, and then adjust as needed.
Use fine, soft grit sandpaper to avoid scratching the silver or steel.
Go ahead and mark the spoon’s handle while marking the piece of paper.
Use a nylon die or die with a leather edge to avoid scuffing silver or stainless steel. [14] X Research source
It can take a few tries to get the feel of a ring bender, so try experimenting with scrap metal before forming your ring. [16] X Research source
Try not to use too much pressure or force the shape. Just keep working your way around the sizer until the end of the handle meet. [18] X Research source
For a duller shine, try hand sanding the spoon ring by lubricating it with WD-40 (to prevent scratches) and following this grit order: #200, #400, #600, #1000, #1500, #2000. [20] X Research source
