You can also opt for a sheer fabric, but you’ll need to wear leggings or a slip under it. A fabric that’s a little stiff may be easiest to work with. [1] X Expert Source Margo WestProfessional Tailor Expert Interview. 7 December 2020. However, avoid fabrics that are very stiff, such as leather, vinyl, and denim, as these are harder to sew.
For example, if your waist is 30 in (76 cm), then multiplying that number by 1. 5 would give you 45 in (110 cm). It’s also a good idea to take a measurement at the largest part of your hip. Write this number down, as well. [4] X Expert Source Margo WestProfessional Tailor Expert Interview. 7 December 2020.
For example, if the waist times 1. 5 is 45 in (110 cm), then adding 2 in (5. 1 cm) gives you 47 in (120 cm). If you want the skirt to be 26 in (66 cm) long, then adding 2 in (5. 1 cm) gives you 28 in (71 cm). This means that you’d need to cut the fabric to 47 in (120 cm) by 28 in (71 cm).
For example, if your waist measurement was 38 in (97 cm), then you’ll need a 5 in (13 cm) wide strip that is 114 in (290 cm) long.
Another option is to iron along the fold to crease it. This may be necessary if the fabric doesn’t crease easily. Use the lowest setting on your iron to make a crease. [10] X Research source
Make sure that you fold the 2 pieces towards each other so they are meeting at the crease.
Remember to remove the pins as you sew to avoid sewing over one of them. This will damage your sewing machine.
Repeat this for both sides of the skirt and the top edge, but don’t worry about the bottom edge yet.
Make sure to remove the pins as you sew. Don’t sew over the pins or you may damage your machine.
Remember to remove the pins as you sew!
Make sure to use a sharp pair of scissors to cut across the fabric. Go slowly and cut straight to avoid leaving any jagged edges.
Remove the pins as you sew to avoid damaging your sewing machine.
After you have finished the ends of the waistband, your skirt is complete! Wrap it around your waist and tie it in a bow or knot to secure it.
