flannel material microfiber towels precision knife cutting mat sewing machine serger (optional)
Pin the materials together in several places to keep them in place when you sew them. Make sure that the pins go through all of the layers of material.
Make sure to avoid the serged edges of the microfiber towels. They may break your needle if you try to sew through them. Remove the pins as you sew.
Use your cutting mat and precision knife to cut off these edges. You can also use a ruler or other straight edge to ensure that that you cut the fabric evenly.
If you have cloth diapers and just needed some inserts, then your project is finished! However, if you need the outer cloth part of the diapers, then you will need to make these next.
To save money, you can also use old flannel sheets or shirts instead of buying fabric by the yard.
Another pattern option is to buy a cloth diaper and trace it onto a pattern made of thick paper, like butcher paper.
If you do not want the raw edges of your material visible, then you can fold over the edges as you sew, but it is not necessary. A little extra fabric on the outer edge of the seam is okay and may even offer some extra leak protection.
It is important to go over the elastic multiple times to ensure that it will stay in place. Make sure that you tug on the elastic as you sew to ensure that it will have the desired cinching effect around the waist.
As you sew on the elastic, make sure to stretch it slightly to ensure that it will pull in the fabric around the legs and back of the diaper. Elastic around the baby’s legs and bottom will help keep in leaks.
Make sure that you stretch the elastic pieces as you go.
It is best to make the hook side of the Velcro your long piece because this piece can be irritating to your baby’s skin. [9] X Research source By placing the hook side on the outer front side of the diaper, it will be less likely to come into contact with your baby’s skin.
Make sure to backstitch a couple of times to be certain that the Velcro is in place. [10] X Research source
Backstitch the squares a couple of times as well to be sure that the Velcro stays in place. [11] X Research source
